NOTE Do not reuse the nuts previously removed from the vehicle

2007 DRIVELINE/AXLES Axle - Sequoia

Fig. 29: Attaching Nuts To Serration Bolts & Removing Serration Bolts From Backing Plate Using A Hammer

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 29: Attaching Nuts To Serration Bolts & Removing Serration Bolts From Backing Plate Using A Hammer

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Grind the retainer and sensor rotor surfaces using a grinder, then pry them out with a chisel and hammer.

2007 DRIVELINE/AXLES Axle - Sequoia

Fig. 30: Grinding Retainer & Sensor Rotor Surfaces Using A Grinder, Then Pry Them Out With A Chisel & Hammer

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 30: Grinding Retainer & Sensor Rotor Surfaces Using A Grinder, Then Pry Them Out With A Chisel & Hammer

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment