Codes other than DTC B1800 may be output at this time, but they are not related to this check. OK: Go to step 12
NG: REPLACE CENTER AIRBAG SENSOR ASSEMBLY
2007 RESTRAINTS Supplemental Restraint System - Sequoia a. From the step 6:
Turn the ignition switch to the LOCK position.
Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
c. Connect the connectors to the center airbag sensor assembly.
d. Using a service wire, connect D+ and D- of the connector "E".
Was this article helpful?