Codes other than DTC B1805 may be output at this time, but they are not related to this check. OK: Go to step 10
NG: REPLACE CENTER AIRBAG SENSOR ASSEMBLY
2007 RESTRAINTS Supplemental Restraint System - Sequoia a. From the step 5:
Turn the ignition switch to the LOCK position.
Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
c. Connect the connectors to the center airbag sensor assembly.
d. Using SST, connect A22-1 (P+) and A22-2 (P-) of connector "C".
Was this article helpful?