Ok Vsc Trac warning light operates

OK: REPLACE SKID CONTROL ECU

2. CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - COMBINATION METER) NG: REPAIR OR REPLACE HARNESS OR CONNECTOR

OK: GO TO Next Step

3. CHECK COMBINATION METER

a. Perform combination meter troubleshooting (See HOW TO PROCEED WITH TROUBLESHOOTING ).

NG: REPAIR OR REPLACE COMBINATION METER

OK: REPLACE SKID CONTROL ECU

BRAKE WARNING LIGHT REMAINS ON

DESCRIPTION

The BRAKE warning light comes on when the brake fluid is insufficient, the parking brake is applied or the EBD is defective.

The skid control ECU is connected to the translate ECU via the CAN1 communication system. WIRING DIAGRAM

2007 BRAKES Brake Control - Sequoia

Toyota Hilux Ecu Wiring Diagram
Fig. 85: Brake Warning Light Remains ON - Wiring Diagram INSPECTION PROCEDURE

HINT:

2007 BRAKES Brake Control - Sequoia

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment