Preload at starting Nm kgfcm inlbf

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 33: Inspecting Drive Pinion Preload Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

4. INSPECT TOTAL PRELOAD

a. Using a torque wrench, measure the total preload with the teeth of the drive pinion and ring gear in contact.

Total preload (at starting): Drive pinion preload plus 0.4 - 0.6 N*m(4 - 6 kgf*cm, 3.5 - 5.2 in.*lbf)

If necessary, disassemble and inspect the differential.

5. REMOVE DIFFERENTIAL VACUUM ACTUATOR ASSEMBLY

a. Remove the 4 bolts.

b. Using a hammer handle, remove the actuator.

2007 DRIVELINE/AXLES Differential - Sequoia

N 0124059
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment