Read Value Of Data List Yaw Rate Sensor

Total OBD & ECU Auto Diagnostics

Total OBD & ECU Auto Diagnostics

Get Instant Access

a. Remove the 2 bolts and the yaw rate sensor assembly with the connector still connected.

b. Connect the intelligent tester to the DLC3.

c. Turn the ignition switch to the ON position and push the intelligent tester main switch ON.

d. Select the DATA LIST mode on the intelligent tester.

e. Check that the yaw rate value of the yaw rate sensor displayed on the intelligent tester changes: Place the yaw rate sensor vertically to the ground and turn the sensor to the right and left.

Fig. 56: Turning Sensor To Right And Left DATA LIST


Measurement Item / Range (Display)

Normal Condition

Diagnostic Note


Yaw rate sensor/ Min.: -128 deg/s, Max.: 127 deg/

Min.:-128 deg/s Max.: 128 deg/s


Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment