Remove Front Axle Hub Bearing

a. Using snap ring pliers, remove the snap ring.

b. Using SST and a press, remove the bearing from the steering knuckle. SST 09950-60020 (09951-00810), 09950-70010 (09951-07150)

2007 DRIVELINE/AXLES Axle - Sequoia

Toyota Hilux Front Hub
Fig. 14: Removing Front Axle Hub Bearing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REASSEMBLY

1. INSTALL FRONT AXLE HUB BEARING

a. Using SST and a press, install a new bearing to the steering knuckle.

SST 09527-17011, 09950-60020 (09951-00910)

b. Using snap ring pliers, install a new snap ring.

2007 DRIVELINE/AXLES Axle - Sequoia

Fig. 15: Installing Front Axle Hub Bearing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • jessie dennis
    How to remove front bearings on 03 sequoia?
    8 years ago

Post a comment