Remove No Air Switching Valve

a. Remove the 4 nuts and 2 gaskets, and disconnect the 2 No.3 air tubes from the exhaust manifolds.

b. Remove the 4 bolts, 2 gaskets and the 2 No.3 air tubes from the 2 No.2 air switching valves.

2007 ENGINE Emission Control - Sequoia

Fig. 24: Removing Nuts & Gaskets, & Disconnect No.3 Air Tubes From Exhaust Manifolds Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. Remove the 4 bolts, 2 gaskets and the 2 No.2 air switching valves from the rear water bypass joint.

d. Remove the 2 vacuum hoses from the No.2 air switching valves.

2007 ENGINE Emission Control - Sequoia

Fig. 25: Removing Bolts, Gaskets & No.2 Air Switching Valves From Rear Water bypass Joint

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 25: Removing Bolts, Gaskets & No.2 Air Switching Valves From Rear Water bypass Joint

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment