Remove Piston Seal

a. Using a screwdriver, remove the piston seal from the caliper.

2007 BRAKES Brake - Sequoia

C123889

Fig. 30: Removing Piston Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

4. REMOVE REAR DISC BRAKE BLEEDER PLUG Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)

5. REMOVE BUSHING, PLUG AND BOOT INSPECTION

1. MEASURE PAD LINING THICKNESS

a. Using a ruler, measure the pad lining thickness.

Standard thickness: 10.0 mm (0.39 in.) Minimum thickness: 1.0 mm (0.039 in.)

Replace the pad if the pad's thickness is at the minimum or if it shows signs of uneven wear.

2007 BRAKES Brake - Sequoia

Fig. 31: Measuring Pad Lining Thickness Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment