Replace Front Seat Inner Belt Assembly Rh

Total OBD & ECU Auto Diagnostics

TOAD Auto Diagnostics

Get Instant Access

a. Turn the ignition switch to the LOCK position.

b. Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.

c. Replace the front seat inner belt RH (See REMOVAL , REMOVAL ).

HINT:

Perform the inspection using parts from a normal vehicle if possible.

d. Connect the negative (-) terminal cable to the battery.

e. Turn the ignition switch to the ON position.

f. Clear the DTCs stored in memory (See DTC CHECK / CLEAR ).

HINT:

2007 RESTRAINTS Supplemental Restraint System - Sequoia g. Turn the ignition switch to the LOCK position.

h. Turn the ignition switch to the ON position.

i. Using the intelligent tester, check the DTCs of the occupant classification ECU (See DTC CHECK / CLEAR ).

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment