Result

Total OBD & ECU Auto Diagnostics

TOAD OBD Scanner

Get Instant Access

RESULT CHART

DTC B1820 is output.

A

DTC B1821 is output.

B

DTC B1822 is output.

C

DTC B1823 is output.

D

2. If not using the intelligent tester (read the 2-digit of DTC): Check the DTCs (See DTC CHECK / CLEAR ). RESULT RESULT CHART

DTC 55 is output. E

HINT:

Codes other than DTC B1820, B1821, B1822, B1823 and DTC 55 may be output at this time, but they are not related to this check.

2007 RESTRAINTS Supplemental Restraint System - Sequoia

B: Go to step 3 C: Go to step 4 D: Go to step 5 E: Go to step 6 A: GO TO NEXT STEP.

2. CHECK FLOOR WIRE (FOR SHORT)

a. Release the activation prevention mechanism built into connector "B" (See CHECK MODE PROCEDURE ).

b. Measure the resistance according to the value(s) in the table below. OK

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection

Condition

Specified Condition

S18-1 (SFR+) - S18-2 (SFR-)

Always

1 Mohms or higher

2007 RESTRAINTS Supplemental Restraint System - Sequoia

Fig. 254: Checking Floor Wire (For Short) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2007 RESTRAINTS Supplemental Restraint System - Sequoia

3. CHECK FLOOR WIRE (FOR OPEN)

a. Measure the resistance according to the value(s) in the table below.

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection

Condition

Specified Condition

S18-1 (SFR+) - S18-2 (SFR-)

Always

Below 1 ohms

2007 RESTRAINTS Supplemental Restraint System - Sequoia

Fig. 255: Checking Floor Wire (For Open) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2007 RESTRAINTS Supplemental Restraint System - Sequoia

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment