Sst

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 36: Removing Differential Side Gear Shaft Oil Seal Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

9. REMOVE INTERMEDIATE SHAFT NO. 1

a. Using SST, remove the intermediate shaft No. 1.

SST 09350-20015 (09369-20040), 09950-40011 (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011)

b. Remove the snap ring.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 37: Removing Intermediate Shaft

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 37: Removing Intermediate Shaft

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

10. REMOVE FRONT DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY

a. Using a chisel and hammer, unstake the nut.

b. Using SST to hold the flange, remove the nut.

SST 09330-00021

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 38: Removing Front Drive Pinion Companion Flange Nut Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. Using SST, remove the companion flange.

SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020)

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 39: Remove Companion Flange Using SST Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

11. REMOVE FRONT DIFFERENTIAL CARRIER OIL SEAL

a. Using SST, remove the oil seal.

SST 09308-10010

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 40: Removing Front Differential Carrier Oil Seal Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

12. REMOVE FRONT DIFFERENTIAL DRIVE PINION OIL SLINGER

SST 09308-10010

a. Remove the oil slinger.

2007 DRIVELINE/AXLES Differential - Sequoia

Sst 09556 22010
Fig. 41: Removing Front Differential Drive Pinion Oil Slinger Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

13. REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING

a. Using SST, remove the rear bearing from the drive pinion.

SST 09556-22010

b. Remove the bearing spacer.

2007 DRIVELINE/AXLES Differential - Sequoia

09556 22010
Fig. 42: Removing Front Drive Pinion Rear Tapered Roller Bearing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

14. REMOVE DIFFERENTIAL SIDE BEARING RETAINER

a. Remove the 10 bolts and tap out the retainer with a plastic hammer.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 43: Removing Differential Side Bearing Retainer Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

15. REMOVE FRONT DIFFERENTIAL CASE SUB-ASSEMBLY

16. REMOVE DRIVE PINION

17. REMOVE FRONT DRIVE PINION FRONT TAPERED ROLLER BEARING

a. Using SST and a press, remove the bearing and washer from the drive pinion.

SST 09950-00020

HINT:

If the drive pinion or ring gear is damaged, replace them as a set.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 44: Removing Front Drive Pinion Front Tapered Roller Bearing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment