Sst

2. Using a snap ring expander, install a new snap ring.

f. Install the intermediate shaft No. 2 to the tube.

1. Install the shaft into the tube.

2. Using needle nose pliers, install a new snap ring.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 59: Installing A New Intermediate Shaft No. 2 Bearing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

g. Install a new oil seal.

1. Using SST and a plastic hammer, install a new oil seal.

SST 09223-15020

Oil seal drive in depth: 5.5 +- 0.3 mm (0.217 +- 0.012 in.)

2. Coat the oil seal lip with MP grease.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 60: Installing New Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 60: Installing New Oil Seal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

h. Install the clutch hub.

1. Install the clutch hub to the shaft.

2. Using a snap ring expander, install a new snap ring.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 61: Installing Clutch Hub

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 61: Installing Clutch Hub

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REASSEMBLY

1. INSTALL FRONT DIFFERENTIAL CASE BEARING

a. Using SST and a press, install 2 new bearings.

SST 09950-60010 (09951-00380)

Bearing press in depth: 0.3 +- 0.3 mm (0.012 +- 0.012 in.)

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 62: Installing Front Differential Case Bearing Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment