Torque Nm kgfcm ftlbf or less

If the maximum torque is exceeded while retightening the nut, replace the bearing spacer and repeat the preload procedure. Do not loosen the pinion nut to reduce the preload.

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 158: Measuring Preload Of Drive Pinion Using Backlash Between Drive Pinion & Ring

Gear Using A Torque Wrench

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 158: Measuring Preload Of Drive Pinion Using Backlash Between Drive Pinion & Ring

Gear Using A Torque Wrench

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

21. INSPECT TOTAL PRELOAD

a. Using a torque wrench, measure the total preload with the teeth of the drive pinion and ring gear in contact.

Total preload (at starting): Drive pinion preload plus 0.4 - 0.6 N*m(4 - 6 kgf*cm, 3.5 - 5.2 in.*lbf)

2007 DRIVELINE/AXLES Differential - Sequoia

Fig. 159: Measuring Total Preload With Teeth Of Drive Pinion & Ring Gear In Contact Using A Torque Wrench

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 159: Measuring Total Preload With Teeth Of Drive Pinion & Ring Gear In Contact Using A Torque Wrench

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment