Remove Rear Door Window Regulator Subassembly

a. Disconnect the connector.

b. Remove the 3 bolts.

c. Loosen the bolt, then remove the window regulator assembly. Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)


2006 ACCESSORIES AND EQUIPMENT Engine Hood/Door - Sequoia

2003 Sequoia Door Window Track
Fig. 38: Removing Bolts From Rear Door Window Regulator Sub-Assembly Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

d. Remove the 3 screws and window regulator motor from the window regulator sub-assembly.


At the time of reassembly, please refer to the following items.

• Tighten the bolts in the order shown in the illustration.

• Apply MP grease to the window regulator assembly.

2006 ACCESSORIES AND EQUIPMENT Engine Hood/Door - Sequoia

Toyota Surf Rear Door Mechanism
Fig. 39: Removing Screws & Window Regulator Motor From Window Regulator Sub-Assembly

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


  • Carli
    How to remove the door window from a 1989 toytoa mr1model aw11?
    8 years ago
  • tellervo
    How to fix a window regulator on a 85 hillux?
    8 years ago
  • zula
    What is regulator subassbly?
    8 years ago
  • asmara gebre
    How to remove toyota 4runner tailgate window?
    8 years ago

Post a comment