El

1. Temporarily install the new parts and measure each part in accordance with the body dimension diagram.

HINT: First instaJJ the radiator upper support.

QUARTER WHEEL HOUSING OUTER PANEL (CUT): Right Side

REMOVAL (With the quarter panel removed.)

□ 4
Butt Weld

Butt Weld

Butt Weld

Body Sealer

Body Sealer

[Foamed Material Application Areas]

Body Sealer about 5 mm

Body Sealer

Butt Weld

Butt Weld

mm

in.

5

0.20

1. Before temporarily installing the new parts, apply body sealer to the wheel arch.

HINT:

1) Apply body sealer about 5 mm (0.20 in.) from the flange, avoiding any oozing.

2) Apply sealer evenly, aout 3 - 4 mm (0.12 - 0.16 in.) in diameter.

2. Temporarily install the new parts and check the fit of the front door, back door and rear combination light.

3. After installing the newparts, apply foamed material.

QUARTER PANEL REAR LOWER EXTENSION (ASSY)

REMOVAL (With the quarter panel removed.)

QUARTER WHEEL HOUSING OUTER PANEL (CUT): 5-Door Left Side

REMOVAL (With the quarter panel removed.)

QUARTER WHEEL HOUSING OUTER PANEL (ASSY): 4-Door Left Side

REMOVAL (With the quarter panel removed.)

Butt Weld

Body Sealer

Body Sealer

Butt Weld

Body Sealer about 5 mm

mm

in.

5

0.20

1. Before temporarily installing the new parts, apply 2. Temporarily installilng the new parts, check the fit of body sealer to the wheel arch. the back door.

HINT:

1) Apply body sealer about 5 mm (0.20 in.) from the flange, avoiding any oozing.

2) Apply sealer evenly, about 3 - 4 mm (0.12 - 0.16 in.) in diameter.

QUARTER PANEL (CUT): 4-Door Right Side, 5-Door

REMOVAL

Cut and Join Location

120 mm

Cut and Join Location

120 mm

Quarter Panel Siena Cut

Cut and Join Location

Cut and Join Location

[Cut and Join Locations]

[Cut and Join Location]

Cut and Join Location

Cut and Join Location

110 mm

mm

in.

110 120

4.33 4.72

mm

in.

5

0.20

1. Before temporarily installing the new parts, apply body sealer to the wheel arch.

HINT:

1) Apply body sealer about 5 mm (0.20 in.) from the flange, avoiding any oozing.

2) Apply sealer evenly, about 3 - 4 mm (0.I2 - 0.I6 in.) in diameter.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment