Rgp

Confirmation mode is completed.

REPLACEMENT

REPLACEMENT REQUIREMENTS

In the following cases, replace the wire harness or connector.

If any part of the SRS wire harness or any connector has been found to be faulty in troubleshooting. If any part of the SRS wire harness or any connector has been found to be faulty during checking items (See page RS-67). CAUTION:

* If the wire harness used in the SRS is damaged, replace the whole wire harness assembly.

* When the connector to the front airbag sensors can be repaired alone (when there is no damage to the wire harness), use the repair wire specially designed for this purpose.

REPLACEMENT

REPLACEMENT REQUIREMENTS

In the following cases, replace the steering wheel pad, steering wheel or spiral cable.

• If the airbag has been deployed.

• If the steering wheel pad or spiral cable has been found to be faulty in troubleshooting.

• If the steering wheel pad, steering or spiral cable has been found to be faulty during checking items. (See page RS-14)

• If the steering wheel pad has been dropped. CAUTION:

For removal and installation of the steering wheel pad, see page SR-11 and SR-20 , and be sure to follow the correct procedure.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment