If Necessary Replace Bearings

(a) Using a brass bar and a hammer, tap out the bearing from the rack housing.

(b) Using SST, press out the bearing from the rack housing SST 09950-60010 (09951-00260), 09950-70010 (09951-07200)

09950 60010

(c) Coat a new bearing with molybdenum disulfide lithium base grease.

(d) Using SST, press in the bearing. SST 09950-60010 (09951-00310),

09950-70010 (09951-07200)

(e) Coat a new bearing with molybdenum disulfide lithium base grease.

(f) Using SST, press in the bearing. SST 09950-60010 (09951-00320),

09950-70010 (09951-07200)

3. IF NECESSARY, REPLACE OIL SEAL

(a) Using SST, remove the oil seal from the bushing.

SST 09527-2001 1, 09612-24014 (09613-22011] NOTICE:

Be careful not to damage the bushing.

(b) Coat a new oil seal lip with power steering fluid.

(c) Using SST, press in the oil seal.

SST 09950-60010 (09951-00240, 09951-00400, 09952-06010)

NOTICE:

Make sure that the oil seal is installed facing in the correct direction.

4. IF NECESSARY, REPLACE TEFLON RING AND O-RING

(a) Using a screwdriver, remove the teflon ring and O-ring from the steering rack.

NOTICE:

Be careful not to damage the groove for the teflon ring.

(b) Coat a new O-ring with power steering fluid and install it.

(c) Expand a new teflon ring with your fingers. NOTICE:

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment