(a) Install the front seat inner belt and washer with the bolt. Torque: 43 Nm (440 kgfcm, 32 ftlbf)
(b) Pass the wire harness between the seat cushion side and cup holder bracket as shown in the illustration.
(c) Clamp the wire harness to the adjuster hole.
(d) Pass the wire harness between the seat cushion and loop handle.
(e) Connect the connector and clamp the wire harness as shown in the illustration.
9. INSTALL SEAT TRACK UPPER RAIL COVERS
10. INSTALL SEAT CUSHION SHIELDS
11. Driver's seat:
INSTALL VERTICAL SEAT ADJUSTER KNOB
12. INSTALL RECLINING ADJUSTER RELEASE HANDLE
13. INSTALL CUP HOLDER
Was this article helpful?