Install Timing Belt See page EM

Toyota Sienna Timing Belt

9. INSTALL ADJUSTING STRUT AND PS PUMP DRIVE BELT

(a) Temporarily install the adjusting strut with the bolt and nut.

(b) Install the drive belt with the pivot and adjusting bolts. Torque: 43.1 Nm (440 kgfcm, 32 ftlbf)

(c) Tighten the nut.

Torque: 43.1 Nm (440 kgfcm, 32 ftlbf)

10. INSTALL A/C COMPRESSOR (See page EM-82 )

11. INSTALL GENERATOR (See page CH-2 )

12. INSTALL RH FENDER APRON SEAL

13. INSTALL FRONT EXHAUST PIPE (See page EM-82 )

14. INSTALL RH FRONT WHEEL

15. INSTALL OUTER FR COWL TOP PANEL ASSEMBLY (See page EM-60)

16. FILL ENGINE WITH OIL

17. START ENGINE AND CHECK FOR LEAKS

18. RECHECK ENGINE OIL LEVEL

2003 Will Not Start 450 717 350 6448

Do not get oil on the gasket. 2. INSTALL NO.3 TIMING BELT COVER

1. INSTALL WATER PUMP

Install a new gasket and the water pump with the 4 bolts and 2 nuts.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment