Removal

1. REMOVE OUTER FR COWL TOP PANEL ASSEMBLY (See page EM-76)

2. REMOVE V-BANK COVER

3. REMOVE AIR CLEANER CAP WITH HOSE

4. REMOVE AIR INTAKE CHAMBER ASSEMBLY (See page EM-33)

5. DISCONNECT INJECTOR CONNECTORS

6. REMOVE AIR ASSIST HOSES AND PIPE

(a) Disconnect the air assist pipe from the bracket on the No.1 fuel pipe.

(b) Remove the air assist hoses from the intake manifold.

7. DISCONNECT NO.1 FUEL PIPE

(a) Remove the fuel hose clamp.

7. DISCONNECT NO.1 FUEL PIPE

(a) Remove the fuel hose clamp.

(b) Disconnect the No.1 fuel pipe (fuel tube connector) from the fuel pipe.

CAUTION:

• Perform disconnecting operations of the fuel tube connector (quick type) after observing the precautions (See page SF-1).

• As there is retained pressure in the fuel pipe line, prevent it from splashing inside the engine compart-m ent.

8. REMOVE DELIVERY PIPES AND INJECTORS

NOTICE:

• Be careful not to drop the injectors when removing the delivery pipes.

• Pay attention to put any hung load on the injector to and from the side direction.

(a) Remove the 5 bolts and delivery pipes together with the 6 injectors and fuel pipe.

(b) Remove the 4 spacers from the intake manifold.

(c) Pull out the 6 injectors from the delivery pipes.

(d) Remove the 2 O-rings and 2 grommets from each injector.

AIR CONDITIONING - WATER VALVE_

AC0V5-03

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment