Removal

1. RUN ENGINE AT IDLE SPEED WITH A/C ON FOR APPROX. 10 MINUTES

2. STOP ENGINE

3. DISCONNECT NEGATIVE (-) TERMINAL CABLE FROM BATTERY

4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

5. REMOVE DRIVE BELT (See page AC-18 )

6. DISCONNECT DISCHARGE AND SUCTION HOSES

Remove the 2 bolts and disconnect the both hoses. NOTICE:

Cap the open fittings immediately to keep moisture or dirt out of the system.

7. REMOVE GENERATOR

(a) Disconnect the generator connector.

(b) Remove the nut, and disconnect the generator wire.

(c) Disconnect the wire harness from the clip.

(d) Remove the pivot bolt, plate washer, adjusting lock bolt and generator.

8. REMOVE COMPRESSOR

(a) Disconnect the connector.

(b) Remove the 2 bolts, nut and drive belt adjusting bar bracket.

(c) Remove the 3 bolts and compressor.

AIR CONDITIONING - BLOWER UNIT_

AC0UR-02

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment