Remove Charcoal Canister Assembly

(a) Disconnect the VSV connector for the pressure switching valve.

(b) Disconnect the vapor pressure sensor connector.

(c) Disconnect the fuel hose from the vapor pressure sensor.

(d) Disconnect the purge line hose, EVAP line hose and air inlet line hose from the charcoal canister.

Evap Vapor Pressure Sensor

Disconnect the vent line hose from the charcoal canister.

(1) Push the connector deep inside.

(2) Pinch portion A.

(3) Pull out the connector.

Remove the 3 charcoal canister mounting nuts. Remove the vapor pressure sensor mounting bolt. Remove the charcoal canister assembly.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


  • Maria
    How to replace charcoal canister toyota sienna?
    8 years ago
  • frank
    Where is the 2000 toyota sienna charcoal canister?
    8 years ago
  • Selma
    How to disconnect charcoal canister lines?
    8 years ago
    When and how to replace evap canister in toyota sienna 2000?
    8 years ago
  • pervinca button
    How to remove vapor line connector charcoal canister pinch?
    4 years ago
  • Abraham
    How to change evap hose on 2000 toyota sienna?
    4 years ago
  • Teuvo
    How to replace charcoal canister in toyota sienna 2004?
    2 years ago

Post a comment