Replacement

REPLACE CRANKSHAFT FRONT OIL SEAL

HINT:

There are 2 methods ((a) and (b)) to replace the oil seal which are as follows:

(a) If the oil pump is removed from the cylinder block. (1) Using a screwdriver, pry out the oil seal.

(2) Using SST and a hammer, tap in a new oil seal until its surface is flush with the oil pump body edge.

SST 09223-00010

(3) Apply MP grease to the oil seal lip.

(b) If the oil pump is installed to the cylinder block.

(1) Using a knife, cut off the oil seal lip.

(2) Using a screwdriver, pry out the oil seal. NOTICE:

Be careful not to damage the crankshaft. Tape the screwdriver tip.

(3) Apply MP grease to a new oil seal lip.

(4) Using SST and a hammer, tap in the oil seal until its surface is flush with the oil pump body edge.

SST 09223-00010

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment