Replacement

1. REMOVE V-BANK COVER

(a) Using a 5 mm hexagon wrench, remove the 3 cap nuts.

(b) Loosen the V-bank cover fastener counterclockwise.

(c) Remove the V-bank cover.

2. REMOVE AIR CLEANER HOSE WITH RESONATOR

3. REMOVE CAMSHAFT POSITION SENSORS

(a) Disconnect the 2 camshaft position sensor connectors.

(b) Remove the bolt and camshaft position sensor. Remove the 2 camshaft position sensors.

(c) Remove the O-rings from the camshaft position sensors.

4. REINSTALL NEW CAMSHAFT POSITION SENSORS

(a) Install new O-rings to new camshaft position sensors.

(b) Install the camshaft position sensor with the bolt. Install the 2 camshaft position sensors.

(c) Connect the 2 camshaft position sensor connectors.

5. REINSTALL AIR CLEANER HOSE WITH RESONATOR

6. REINSTALL V-BANK COVER

(a) Using 5 mm hexagon wrench, install the V-bank cover with the 3 cap nuts.

(b) Press down the V-bank cover fastener.

_LUBRICATION - OIL PUMP_

LU01V-03

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment