Replacement

1. REMOVE V-BANK COVER

(a) Using a 5 mm hexagon wrench, remove the 3 cap nuts.

(b) Loosen the V-bank cover fastener counterclockwise.

(c) Remove the V-bank cover.

2. REMOVE IGNITION COILS

(a) Disconnect the 6 ignition coil connectors.

(b) Remove the bolt, and pull out the ignition coil. Remove the 6 ignition coils.

3. REINSTALL NEW IGNITION COILS

(a) Connect a new ignition coil to the spark plug, and attach the ignition coil to the cylinder head cover, and install the bolt. Install the 6 ignition coils.

(b) Connect the 6 ignition coil connectors.

4. REINSTALL V-BANK COVER

(a) Using 5 mm hexagon wrench, install the V-bank cover with the 3 cap nuts.

(b) Press down the V-bank cover fastener.

IGNITION - CRANKSHAFT POSITION SENSOR

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment