Assembly Of Direct Clutch

1. INSTALL DIRECT CLUTCH PISTON TO DIRECT CLUTCH

DRUM

(a) Coat new O-rings with ATF and install them on the direct clutch piston.

(b) Being careful not to damage the O-rings, press in the direct clutch piston into the clutch drum with both hands.

2. INSTALL PISTON RETURN SPRING

(a) Install the piston return spring.

(b) Place SST on the spring retainer, and compress the return spring with a shop press.

SST 09350-30020 (09350 07040)

(c) Install the snap ring with snap ring pliers. Be sure the end gap of the snap ring is not aligned with the spring retainer claw.

Was this article helpful?

0 0

Post a comment