Disassemble Inboard Joint Tulip

(a) Place matchmarks on the inboard joint tulip and tripod. NOTICE: Do not punch the marks.

(b) Remove the inboard joint tulip from the rear drive shaft.

Toyota Sienna 2004 Tripod Joint Assy

4. DISASSEMBLE TRIPOD JOINT

(a> Using snap ring pliers, remove the snap ring. <b) Using a punch and hammer, place matchmarks on the shaft and tripod.

Drive Shaft Tripod Remove

<c) Using a brass bar and hammer, remove the tripod joint from the drive shaft.

5. REMOVE INBOARD JOINT BOOT

6. REMOVE OUTBOARD JOINT BOOT CLAMPS AND BOOT NOTICE: Do not disassemble the outboard joint.

7. REMOVE DUST DEFLECTOR

Using a screwdriver and hammer, remove the dust deflector.

Was this article helpful?

0 0

Responses

  • MARIAM
    How to remove inboard joint toyota coralla gearbox?
    8 years ago

Post a comment