Disassembly Of Cylinder

1. REMOVE SLIDING BUSHING AND DUST BOOT

2. REMOVE MAIN PIN BOOT

Pull out the main pin boot.

2. REMOVE MAIN PIN BOOT

Pull out the main pin boot.

3. REMOVE CYLINDER BOOT SET RING AND CYLINDER BOOT

Using a screwdriver, remove the cylinder boot set ring and cylinder boot.

4. REMOVE PISTON FROM CYLINDER

(a) Put a piece of cloth or an equivalent as shown.

(b) Use compressed air to remove the piston from the cylinder.

CAUTION: Do not place your fingers in front of the piston when using compressed air.

5. REMOVE PISTON SEAL FROM BRAKE CYLINDER

Using a screwdriver, remove the piston seal.

Was this article helpful?

0 0

Post a comment