1. REMOVE REAR DISC BRAKE ASSEMBLY
(a) Remove the two mounting bolts and remove the disc brake assembly.
(b) Suspend the disc brake so the hose is not stretched.
2. REMOVE ROTOR DISC
Place the matchmarks on the rotor disc and rear axle shaft, and remove the rotor disc.
HINT: If the drum cannot be removed easily, return the shoe adjuster until the wheel turns freely.
3. REMOVE SHOE RETURN SPRINGS
Using SST. remove the shoe return springs. SST 09717 20010
4. REMOVE SHOE STRUT WITH SPRING
5. REMOVE FRONT SHOE. ADJUSTER AND TENSION SPRING
(a) Slide out the front shoe and remove the shoe adjuster.
(b) Disconnect the tension spring and remove the front shoe.
6. REMOVE REAR SHOE
(a) Slide out the rear shoe.
(b) Remove the tension spring from the rear shoe.
(c) Disconnect the parking brake cable from the parking brake shoe lever.
(d) Remove the shoe hold-down spring cups, springs and pins.
Was this article helpful?