Inspect Clutch Plate For Wear Or Damaged

Check see that there is no abnormal wear.

If necessary, replace the clutch plate.

HINT: As shown in the illustration, there are two types of clutch plates. The clutch plate in differential will either have a notched portion on its rim or teeth missing at two places on the inner ring (right side), or a cluth plate with no missing teeth or notched portion (left side).

Therefore, when replacing the clutch plates never mix these two types inside the same differential.

4. INSPECT SPRING FREE LENGTH

Measure the free length of the spring. Limit: 31.3 mm (1.232 in.)

Was this article helpful?

0 0

Post a comment