Install Overdrive Support Assembly

(a) Coat the race with petroleum jelly and install it onto the overdrive support assembly.

HINT: Race diameter

mm (in.)

Inside

Outside

Race

36.8 (1.449)

50.9 (2.004)

(b) Using two bolts of SST, aim the bolt and oil holes of the overdrive support toward the valve body side, and align them with the bolt holes of the transmission case and insert.

SST 09350-30020 (09350 07020)

(c) Using SST, install the snap ring as shown in the figure. SST 09350-30020 (09350-07060)

(d) Install and torque the two bolts. Torque: 260 kg-cm (19 ft-lb, 25 N-m)

Was this article helpful?

0 0

Post a comment