Install Snap Rings

(a) Install two snap rings of equal thickness which will allow 0 — 0.05 mm (0 — 0.0020 in.) axial play.

HINT: Do not reuse the snap rings.

Mark

Color

Thickness mm (in.)

1

_

2.100

- 2.150 (0.0827

- 0.08461

2

2.150

- 2.200 (0.0846

- 0.08661

3

2.200

- 2.250 (0.0866

- 0.08861

Brown

2.250

- 2.300 (0.0886

- 0.09061

Blue

2.300

- 2.350 (0.0906

- 0.09251

6

2.350

- 2.400 (0.0925

- 0.0945»

7

2.400

- 2.450 (0.0945

- 0.0965)

8

-

2.450

2.500 (0.0965

0.0984)

(b) Using a hammer, tap the yoke until there is no clearance between the bearing outer race and snap ring.

7. CHECK SPIDER BEARING

(a) Check that the spider bearing moves smoothly.

(b) Check the spider bearing axial play.

Bearing axial play: Less than 0.05 mm (0.0020 in.»

HINT: Install new spider bearings on the shaft side in the procedure described above.

Was this article helpful?

0 0

Post a comment