Installation Of Rear Axle

1. TEMPORARILY CONNECT UPPER ARM TO BODY

2. TEMPORARILY CONNECT AXLE HUB ASSEMBLY TO UPPER ARM

Temporarily install a new nut.

3. CONNECT N0.1 LOWER SUSPENSION ARM Torque: 600 kg-cm (43 ft-lb. 59 N-m)

4. TEMPORARILY CONNECT NO.2 LOWER SUSPENSION ARM

5. TEMPORARILY CONNECT STRUT ROD

6. TORQUE UPPER ARM MOUNTING NUT Torque: 1.100 kg-cm <80 ft-lb. 108 N-m)

7. CONNECT SHOCK ABSORBER

8. INSTALL PARKING BRAKE ASSEMBLY (See page BR-43)

9. INSTALL ROTOR DISC (See page BR-45)

10. INSTALL REAR DRIVE SHAFT (See page RA-21)

11. INSTALL BRAKE CALIPER

12. TORQUE SUSPENSION PARTS

(a) Install the wheel and lower the vehicle.

(b) Bounce the vehicle up and down to stabilize the suspension.

vtmm

(c) Torque the suspension mounting bolts and nuts with the vehicle weight on the suspension.

Torque:

Upper arm x body

No.2 lower suspension arm x axle carrier

1.670 kg-cm (121 ft-lb. 164 N-m) Strut rod x axle carrier

Was this article helpful?

0 0

Post a comment