Installation Of Water Pump

1. INSTALL WATER PUMP

Install the water pump on a new gasket with the eight bolts and two nuts.

Torque:

10 mm bolt

90 kg-cm <78 in. lb, 8.8 N-m» 12 mm head bolt and nut

2. INSTALL PS AIR PIPE

3. INSTALL WATER PUMP PULLEY. FLUID COUPLING AND ALTERNATOR DRIVE BELT

(a) Install the water pump pulley and fluid coupling with the four nuts.

(b) Place the fan belt on to each pulley.

(c) Stretch the belt tight and tighten the four nuts.

4. INSTALL A/C BELT

5. ADJUST ALTERNATOR DRIVE BELT TENSION (See page MA-4)

6. FILL WITH COOLANT

7. START ENGINE AND CHECK FOR LEAKS

f

W W fcfr^

L>

/-* \ / i^v ^

lUt, 7*4

Jiggle Valve

Jiggle Valve

cvow

Was this article helpful?

0 0

Post a comment