1. INSTALL THROTTLE BODY
(a) Install the VTV.
(b) Install the two water by-pass hoses.
(c) Install a new gasket and throttle body with the four bolts.
(d) Connect the two water by pass hoses to the ISC valve and water pipe.
2. CONNECT THROTTLE POSITION SENSOR CONNECTOR
3. CONNECT VACUUM HOSES
4. INSTALL AIR INTAKE CONNECTOR (See steps 15 to 17 on page EM-14)
5. INSTALL ACCELERATOR ROD
6. REFILL WITH COOLANT
Was this article helpful?