Remove the four breakaway bracket bolts, and pull out the column tube.
5. REMOVE TENSION SPRINGS AND CORDS
(a) Fully tilt the main shaft upward.
(b) Using a screwdriver, pry out the cord tip and remove the springs 8nd cords.
6. REMOVE TELESCOPIC LEVER
Remove the nut and telescopic lever.
7. REMOVE TELESCOPIC LEVER LOCK BOLT
8. REMOVE MAIN SHAFT ASSEMBLY
(a) Remove the column tube stopper.
(b) Pull out the mam shaft assembly and then catch the two lock wedges by hand. HINT: Be careful the spline part of the main shaft does not come loose.
Was this article helpful?