Replacement Of Bearing

IF NECESSARY, REPLACE COUNTER GEAR FRONT BEARING

(a) Using snap ring pliers, remove the snap ring.

(b) Using SST, press out the bearing. SST 09950 00020

(c) Replace the side race.

(d) Using a 24 mm socket wrench, press in the bearing and inner race.

(e) Select a snap ring that will allow minimum axial play and install it on the shaft.

Mark

Thicknoss

mm (in.)

A

2.00 - 2.05 (0.0787

0.0807)

8

2.05 - 2.10 (0.0807

- 0.0827)

C

2.10 - 2.15 (0.0827

- 0.0846)

D

2.15 - 2.20 (0.0846

- 0.0866)

E

2.20 - 2.25 (0.0866

- 0.0886)

Was this article helpful?

0 0

Post a comment