Replacement Of Bearing

IF NECESSARY. REPLACE INPUT SHAFT BEARING

(a) Using snap ring pliers, remove the snap ring.

(b) Using a press, remove the bearing.

<c) Using a press and SST, install a new bearing. SST 09506-35010

<d) Select a snap ring that will allow minimum axial play and install it on the shaft.

Mark

Thickness

mm (in.)

1

2.05 - 2.10 <0.0807

0.0827)

2

2.10 - 2.15 (0.0827

- 0.0846)

3

2.15 - 2.20 (0.0846

- 0.0866)

4

2.20 - 2.25 (0.0866

- 0.0886)

5

2.25 - 2.30 (0.0886

- 0.0906)

11

2.30 - 2.35 (0.0906

- 0.0925)

12

2.35 - 2.40 (0.0925

0.0945)

Output Shaft Assembly

Was this article helpful?

0 0

Post a comment