Replacement Of Power Steering Fluid

1. JACK UP FRONT OF VEHICLE AND SUPPORT IT WITH STANDS

Mr2 Steering Fluid Drain

2. REMOVE FLUID RETURN HOSE FROM RESERVOIR TANK AND DRAIN FLUID INTO CONTAINER

BU» SR16M

3. WITH ENGINE IDLING. TURN STEERING WHEEL FROM LOCK TO LOCK WHILE DRAINING FLUID

4. STOP ENGINE

5. FILL RESERVOIR TANK WITH FRESH FLUID Fluid type: ATF DEXRON* D

6. START ENGINE AND RUN IT AT 1,000 RPM

After 1 or 2 seconds, fluid will begin to discharge from the return hose. Stop the engine immediately at this time.

NOTICE: Take care that some fluid remains left in the reservoir tank.

7. REPEAT STEPS 5 AND 6 FOUR OR FIVE TIMES UNTIL THERE IS NO MORE AIR IN FLUID

8. CONNECT RETURN HOSE TO RESERVOIR TANK

9. BLEED POWER STEERING SYSTEM

+2 0

Responses

  • elijah
    What power steering fluid mk3 supra?
    7 years ago
  • fiyori rezene
    Where to put power steering fluid in toyota supra?
    7 years ago

Post a comment