Spark Test

HINT: Perform this test to check that voltage is coming from the ignition coil to the spark plug.

1. DISCONNECT N0.1 AIR CLEANER HOSE

2. DISCONNECT FOLLOWING CABLES:

la) Cruise control cable

(b) Accelerator cable

3. REMOVE ISC PIPE

(a) Disconnect the six hoses from the ISC pipe.

(b) Remove the two bolts and ISC pipe.

IM6250

4. REMOVE PCV PIPE WITH HOSES

(a) Remove the oxygen sensor wire from the two clamps.

(b) Disconnect the No.4 PCV hose from the PCV pipe.

(c) Remove the two bolts.

(d) Disconnect the PCV pipe with hoses from the cylinder head covers and throttle body.

5. REMOVE INTAKE AIR CONNECTOR

(a) Disconnect the air valve hose from the intake air connector.

(b) Loosen the clamp and remove the two bolts.

(c) Remove the intake air connector.

IM6250

Was this article helpful?

0 0

Post a comment