Troubleshooting

Problem

No.

"ANTILOCK" warning light

Always comes on after ignition switch is turned on.

1

Does not come on for 3 seconds after ignition switch on.

2

Comes on and off below 10 km/h (6 mph).

3

Comes on while running.

1

Brake working

Brakes pull.

4

8raking inefficient.

4

A.B.S. operates at ordinary braking.

4

A.B.S. Operates just before stopping at ordinary braking.

4

Brake pedal pulsates abnormally while A.B.S. is operating.

4

Skidding no»se occurs while A.8.S. working. (A.B.S. works inefficiently)

5

Continued on page BR-56

and check that the warning light goes on. If it does, the computer terminal is OK.

'ANTILOCK" warning light comes on and off.

• Actuator check connector is disconnected.

• Open circuit in wire harness between computer terminal T and actuator terminal T.

• Actuator terminal GND is improperly connected or open circuit in wire harness between actuator terminal GND and body ground.

8rakes pull.

8raking inefficient.

4

A.8.S. operates at ordinary braking.

A.B.S. operates just before stopping at ordinary braking.

Brake pedal pulsates abnormally while A.B.S. working.

CI amp

Actuator Assembly

Solenoid Relay

Pump Motor Relay

Actuator Bracket lag ern (ftib, N m) ■ : Specified torque

Was this article helpful?

0 0

Post a comment