Inspect Crankshaft Position Sensor Resistance
(a) Disconnect the C5 Crankshaft Position (CKP) sensor connector.
(b) Measure the resistance between terminals 1 and 2. Standard Resistance
|
Tester Connections |
Specified Conditions |
|
1 - 2 |
1,630 n to 2,740 n at cold |
|
1 - 2 |
2,065 n to 3,225 n at hot |
HINT:
Terms cold and hot refer to the temperature of the coils. Cold means approximately -10° to 50°C (14° to 122°F). Hot means approximately 50° to 100°C (122° to 212°F). Reconnect the CKP sensor connector.
NGj>
Was this article helpful?
Do It Yourself Car Diagnosis
Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.
Post a comment