Installation

1. INSTALL THROTTLE WITH MOTOR BODY ASSEMBLY

(a) Install a new gasket and the throttle with motor body with the 4 bolts.

(b) Connect the throttle motor connector.

(c) Connect the water by-pass hose No. 4.

(d) Connect the water by-pass hose No. 5.

2. INSTALL AIR CLEANER ASSEMBLY

(a) Install the air cleaner with the 2 bolts. Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)

(b) Connect the ventilation hose No. 2.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. ADD ENGINE COOLANT (See page CO-3)

5. CHECK FOR ENGINE COOLANT LEAKAGE (See page CO-4)

6. INSTALL V-BANK COVER

(a) Install the V-bank cover with the 2 nuts. Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment