P Vent valve stuck closed

One of the following conditions set

EVAP pressure just after reference pressure measurement start

-1 kPa (-7.5 mmHg) or more

Reference pressure

Less than -4.85 kPa (-36.4 mmHg)

Reference pressure

-1.057 kPa (-7.9 mmHg) or more

0.02 inch leak criterion

Not saturated within 60 seconds

Difference between first reference pressure and second reference pressure

More than 0.7 kPa (5.25 mmHg)

P2420: Vent valve stuck open (vent)

EVAP pressure change in 10 seconds when vent valve turned ON after measurement of 0.02 inch leak criterion

Less than 0.3 kPa (2.25 mmHg)

"Saturated" indicates that the EVAP pressure change is less than 0.286 kPa (2.14 mmHg) in 60 seconds. MONITOR RESULT

Refer to Checking Monitor Status (See page ES-21) or (See page ES-422).

ES

DTC

P2430

Secondary Air Injection System Air Flow / Pressure Sensor Circuit Bankl

DTC

P2431

Secondary Air Injection System Air Flow / Pressure Sensor Circuit Range / Performance Bankl

DTC

P2432

Secondary Air Injection System Air Flow / Pressure Sensor Circuit Low Bankl

DTC

P2433

Secondary Air Injection System Air Flow / Pressure Sensor Circuit High Bankl

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment