Power Steering Service Data

Power steering fluid

Fluid level rise

Maximum

5 mm (0.20 in.)

Fluid pressure at idle speed with valve closed

8,300 to 8,800 kPa (85 to 90 kgf/cm2, 1,209 to 1280 psi)

Steering Wheel

Steering effort at idle speed

(Reference)

6.0 N*m (60 kgf*cm, 53 in.*lbf) or less

Vane pump assembly

Pulley shaft and vane pump housing front oil clearance

Standard Maximum

0.021 to 0.043 mm (0.0008 to 0.0017 in.) 0.07 mm (0.0028 in.)

Vane plate height

Minimum

7.7 mm (0.303 in.)

Vane plate thickness

Minimum

1.408 mm (0.0554 in.)

Vane plate length

Minimum

11.993 mm (0.4722 in.)

Vane pump rotor and vane plate clearance

Maximum

0.025 mm (0.0012 in.)

Compression spring free length

Minimum

36.9 mm (1.453 in.)

Vane pump rotating torque

0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less

Power steering link assembly (2WD)

Tie rod end turning torque

0.83 to 3.43 N*m (8.5 to 35.0 kgf*cm, 7.35 to 30.36 in.*lbf)

Power steering rack runout

Maximum

0.3 mm (0.012 in.)

Power steering control valve turning torque

0.8 to 1.1 N*m (8.2 to 11.2 kgf*cm, 7.1 to 9.7 in.*lbf)

Steering rack boot No. 1 clamp clearance

3.0 mm (0.118 in.) or less

Power steering link assembly (4WD and Pre-Runner)

Tie rod end turning torque

0.49 to 3.43 N*m (5.0 to 35.0 kgf*cm, 4.34 to 30.36 in.*lbf)

Power steering rack runout

Maximum

0.3 mm (0.012 in.)

Power steering control valve turning torque

0.9 to 1.5 N*m (9.2 to 15.3 kgf*cm, 8.0 to 13.3 in.*lbf)

Steering rack boot No. 1 clamp clearance

3.0 mm (0.118 in.) or less

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment