Typical Enabling Conditions

Monitor runs whenever these DTCs not present

None

EVAP key-off monitor runs when all of following conditions met

-

Atmospheric pressure

525 to 825 mmHg (70 to 110 kPa)

Battery voltage

10.5 V or more

Vehicle speed

Below 2.5 mph (4 km/h)

Ignition switch

OFF

Engine condition

Not running

Fuel tank pressure sensor malfunction (P0450, P0451, P0452 and/or P0453)

Not detected

Purge VSV

Not operated by scan tool

Vent valve

Not operated by scan tool

Leak detection pump

Not operated by scan tool

Both of following conditions met before IG switch OFF

Conditions 1 and 2

1. Duration that vehicle driven

5 min. or more

2. Purge flow

Executed

ECT

4.4° to 35°C (40° to 95° F)

IAT

4.4° to 35°C (40° to 95°F)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment