Typical Enabling Conditions

Total OBD & ECU Auto Diagnostics

TOAD ECU Tuning Software

Get Instant Access

Monitor runs whenever following DTCs not present

None

TYPICAL MALFUNCTION THRESHOLDS

ECM RAM errors (P0604):

RAM mirror check

fail

ECM CPU range check (P0606):

Either of following conditions met:

-

Difference between throttle valve position of main CPU and throttle valve position of sub CPU

0.3 V or more

Difference between accelerator pedal position of main CPU and accelerator pedal position of sub CPU

0.3 V or more

ECM CPU malfunction (P0607):

Either A or B met

-

A. Following conditions met

CPU reset

1 time or more

Learned TP - learned APP

0.4 V or more

Throttle actuator

OFF

B. CPU reset

2 times or more

Electronic throttle control system power supply function of ECM malfunctions (P0657):

ETCS (Electronic Throttle Control System) power supply when ignition switch turned ON

7 V or more

Electronic throttle control system power supply function of ECM malfunctions (P0657):

ETCS (Electronic Throttle Control System) power supply when ignition switch turned ON

7 V or more

Read freeze frame data using an intelligent tester. Freeze frame data record the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data, from the time the malfunction occurred.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment