Assemble Piston And Connecting

(a) Coat the piston pin and pin holes of the piston with engine oil.

(b) Align the cavity on the piston with the protrusion on the connecting rod.

(c) Using SST, press in the piston pin.

SST 09221-25025 (09221-00020, 09221-00030, 09221-00130, 09221-00140, 09221-00150)

(d) After installing the piston pin, check that when the connecting rod is aligned with the center of the piston the space between the piston and each end of the piston pin are equal on the left and right sides.

HINT:

If the piston pin is off-center due to insufficient insertion pressure on the piston pin, place a washer at the position indicated by # in the illustration for (c). Then, while checking that the space is equal at the ends of the piston pin on the left and right sides, press in the washer. 2. INSTALL PISTON RINGS

(a) Install the oil ring expander and 2 side rails by hand.

(b) Using a piston ring expander, install the 2 compression rings with the code mark facing upward.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • john
    How to replace 1996 toyota tercel piston?
    3 years ago

Post a comment