Be careful of the holder installation direction

(b) Place the voltage regulator together with the brush holder horizontally on the rectifier end frame.

(c) Install the 5 screws until there is a clearance of approx. 1.0 mm (0.04 in.) between the brush holder and voltage regulator.

(d) Fit the brush holder cover.

8. INSTALL REAR END COVER

Install the end cover with the 3 nuts. Torque: 4.4 Nm (45 kgfcm, 40 in.lbf)

Install the end cover with the 3 bolts. Torque: 4.4 Nm (45 kgfcm, 40 in.lbf)

(c) Install the terminal insulator with the nut. Torque: 4.1 Nm (42 kgfcm, 36 in.lbf)

9. CHECK THAT ROTOR ROTATES SMOOTHLY

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment